Tangit glue & cleaner
Tangit glue & cleaner
Tangit All Pressure
Tangit All Pressure hard PVC adhesive is suitable for gluing pipe systems in the longitudinal direction, sleeves and fittings made of PVC-U where there is high pressure (max. 16 atm) and/or chemical stress.
Tangit All Pressure Adhesive meets the standards, among others: DIN 16970, KOMO and KIWA/ATA. The adhesive is gel-shaped and can bridge tolerances of up to a maximum of 0.8mm.
This glue lasts for 18 months! Tangit glue is toluene-free, better for people and the environment!
Product advantages
- Long open time of 4 minutes
- Even larger dimensions are easy to glue (up to 80 mm one person is enough)
- Simple and clean handling
- Greater safety thanks to excellent gap bridging behavior (low flow value)
- Maximum protection against leaks
- Adhesive connection as durable as the pipe material (exception: concentrated acids)
- Meets DIN EN 14814 and DIN EN 14680
- Complies with EN 1329 for draining water from plastic pipe systems
- Excellent for use in food applications (SGS, Institut Fresenius, test report no. 727685-01/02)
Purpose of use
- For bonding thermoplastic pressure pipe systems made of rigid PVC (gas) – according to EN 1452
- Suitable for pressureless pipe systems (wastewater) – according to EN 1329
- Assembly and repair work (e.g. gutters)
- Ideal for construction bonding with PVC sheet material (e.g. collecting trays, housing boxes)
- The pipe ends must be cut off at right angles, beveled and deburred (see illustration). If the pipe bevel is missing or incorrect, a permanently tight connection cannot be achieved.
- Fine cleaning is carried out with Tangit PVC-U/C/ABS cleaner.
Processing:
- Stir Tangit well before use. The adhesive should flow slowly from a stick held at an angle, forming a kind of adhesive plume. Apply an even, continuous layer of adhesive in the axial direction, first into the socket, then onto the pipe.
- Apply a thin layer of Tangit to the socket to avoid detrimental bulging in the pipe; Apply generously to the end of the pipe. With Tangit PVC-U, tolerances of up to +0.6 mm can be bridged according to DIN EN 14814.
- Immediately push the pipe and sleeve together as far as they will go or to the full depth of the sleeve without twisting/tilting each other and hold them there for a few seconds until the adhesive has set.
- Immediately after assembly, remove excess adhesive with cleaning paper. Due to the rapid setting of the adhesive, the parts to be joined must be pushed together within 4 minutes of the start of the adhesive application.
- Due to the smaller amount of adhesive when using Tangit tubes, the pipe dimensions to be glued should not be larger than DN 80.
- For dimensions from DN 80, two people should apply the adhesive to the pipe and socket at the same time. The open time of Tangit, i.e. the time from the start of the adhesive application to the joining of the parts, depends on the film thickness of the adhesive and/or the ambient temperature.
A notice:
- Before commissioning, the pipes must be thoroughly flushed to remove any solvent vapors that may still be present.
- Tangit PVC-U is ready for use and must not be diluted under any circumstances.
- Tangit PVC-U and Tangit PVC-U/C/ABS cleaners have an effect on PVC-U. Therefore, keep pipes and fittings away from any spilled adhesive/cleaner.
- Immediately close containers that are not in use tightly to avoid solvent loss and thickening. Any adhesive film that may be present must be removed. Wipe off any thickened adhesive sticking to the brush with dry fleece paper. Cleaned brushes must be dry before reuse.
Tangit PVC-U/C/ABS cleaner
Tangit cleaner: For cleaning hard PVC pipes before they are glued with Tangit. Tangit cleaner is based on acetone and butanone. Tangit cleaner is free of methylene chloride, better for people and the environment!
Product advantages
- Ensures secure bonding with Tangit pipe adhesives
- Reliably removes residues and impurities
- Prevents leakage problems
- Excellent cleaning properties
- Very good dissolving properties
- Constantly controlled and consistently high quality
Purpose of use
- Cleaning agent for adhesive connections made of PVC-U and PVC-C and ABS (use PP/PE/PB/PVDF Tangit special cleaner for plastic welded connections)
- Necessary system component for Tangit pipe adhesives
Tangit PVC Plus
- For all printing applications
- Gap filling up to +0.6 mm
- Does not contain THF
- High performance
Product advantages
- For bonding thermoplastic pressure pipe systems made of PVC-U according to EN 1452 and EN ISO 15493
- Suitable for pressureless pipe systems (wastewater) – according to EN 1329
- Long open time of 3 minutes
- Gap-filling and thixotropic
- Greater safety thanks to excellent gap bridging behavior (low flow value)
- Maximum protection against leaks
- Free of THF and CHN
- Simple and clean handling
Purpose of use
- For bonding thermoplastic pressure pipe systems made of PVC-U according to EN 1452 and EN ISO 15493
- Meets the requirements of DIN EN 14814: Adhesives for pressure piping systems made of thermoplastic plastics for fluids and DIN EN 14680: Adhesives for pressureless piping systems
- Meets the requirements of DIN EN 14814, adhesives for pressure piping systems made of thermoplastic plastics for fluids and DIN EN 14680, adhesives for pressureless piping systems
- Approved for gas and drinking water applications
The universal seal for screw thread connections. Consists of multi-strand nylon cord that is impregnated with a silicone solution that ensures sealing of metals and plastics. Can be put under direct pressure. Water up to 7 bar, gas up to 16 bar. Suitable for: All liquids (except hydrocarbon and oxygen) from -20° to 130°C. For all gaseous substances (natural gas, butane, propane, compressed air). For all materials: PVC-U, PVC-C, PP, PE, steel, copper, cast iron, brass, stainless steel, aluminum. All diameters up to 6", all types of screw thread connections - conical and cylindrical. Shock and weather resistant, correctable up to ½ turn, prevents backlash, clean.
Product advantages
- KTW/DVGW/ÖVGW approved (drinking water and gas)
- Very easy to process
- Ready to use straight from the dispenser – no additional pastes required
- Replaces hemp and PTFE tapes (Teflon®)
- One Tangit UNI-LOCK dispenser replaces approx. 20 rolls of Teflon® tape
- Up to 55% cheaper and up to 45% faster than hemp (according to REFA study)
- Easy alignment of outlet taps possible
- Correctable up to 45°
- Immediate sealing of water, gas and compressed air pipes
- Also suitable for plastic threads
- Especially for conical-cylindrical thread combinations
Purpose of use
- Sealing of metal and plastic threads
- Connection of outlet taps and distributors
- Connection of molded parts and fittings (outlet taps, distributors, clocks and measuring points)
- Assembly of compressed air lines
View full details
free shipping from 49€ MBW
From a minimum order value of 49€ we offer free shipping within Germany. The free shipping does not apply to Koi shipping and freight forwarding goods.
-
Free Shipping
From a minimum order value of 49€ we offer free shipping within Germany. The free shipping does not apply to Koi shipping and freight forwarding goods
-
appointment bookings
Would you like to come by? Simply book your appointment by calling 02137 9296296.